• Series II, 2.4GHz digital transmission
• 128-bit encryption
• Up to 100 metres range*
• OLED display (on receiver)
• One button pairing
• Three level gain control
• AA battery or USB powered
• Includes broadcast Lavalier microphone
• Two year extended warranty when you register your microphone

RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

* range estimations based on optimal environment

Visit the RØDELink feature page

RØDELink Filmmaker Kit Specifications

Transmission type 2.4GHz Fixed Frequency Agile System

System dynamic range 112dB

Range (distance) Up To 100m

Frequency range 35Hz - 22kHz

Maximum output level 1v Rms (2.8v P-p)

Max input signal level 1v Rms (2.8v P-p)

Max latency 4ms

Receiver (RX-CAM)

Power source 2 X AA Battery Or MicroUSB

Antenna Internal

Input connection 3.5mm TRS Locking Jack Socket - Dual Mono

Input impedance 300Ω

Dimensions 111mm X 65mm X 52mm

Weight 190gm

Transmitter (TX-BELT)

Power source 2 X AA Battery Or MicroUSB

Antenna Internal

Input connection 3.5mm TRS Locking Jack Socket

Input impedance 10kΩ

Dimensions 111mm X 65mm X 40mm

Weight 190gm

Lavalier

Acoustic Principle Pressure Gradient

Active Electronics JFET impedance converter

Capsule 0.10"

Address Type End

Frequency Range 60Hz - 18kHz

Output Impedance 3000Ω

Maximum SPL 110dB SPL (@ 1kHz, 1% THD into 1KΩ load)

Maximum Output Level 189.0mV

Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz

Equivalent Noise Level (A-weighted) 25dB-A

Weight 1.00gm

Dimensions 12.00mmH x 4.50mmW x 4.50mmD