+6 dB to allow muting of individual outputs and for level matching. Also, these outputs each have phase reverse
switches that will help get you out of a bind without having to reconfigure your system. These phase reverse switches
may be internally reconfigured as mute switches.
Youll get great performance, all the features youd expect from a professional product and the knowledge that youre
buying a processor from the people that have been producing the worlds finest processors for over 25 years. The technology
that made us famous brings you a dbx crossover that has been tested to the highest professional standards at
XLR balanced ins and outs
Mode switch for stereo 2-way or mono 3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40 Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
INPUT
Connectors: XLR
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced >50k ohm, unbalanced >25k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >50dB at 1kHz
OUTPUTS
Connectors: XLR
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k or greater
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB
Signal-to-Noise: Ref: +4 dBu, 22 kHz measurement bandwidth
Stereo Mode >94dB (Low Output)
>92dB (High Output)
Mono Mode: >94dB (Low Output)
>93dB (Mid Output)
>92dB (High Output)
Dynamic Range: > 114 dB, unweighted, any output
THD + Noise: < 0.004% at +4 dBu, 1 kHz
< 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
CROSSOVER FREQUENCIES
Stereo Mode: Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCHES
Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
Phase Invert: Inverts the phase at the output, one switch per output
Rear Panel:
x1 / x10:
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel
Mode: Selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode
LF sum: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2s low output phase invert LED to indicate that this output is not operational in the LF sum mode
INDICATORS
Stereo Operation: Green LED
Mono Operation: Yellow LED
Low Cut: Red LED per channel
x10 Green LED per channel
Phase Invert: Red LED per output (2 per channel)
POWER SUPPLY
Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
Power consumption: 15W
Main Connection: IEC 320 receptacle
PHYSICAL
Dimensions: 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Weight: 3.7 lbs. (1.7 kg)
Shipping Weight: 5.4 lbs. (2.5 kg)
Note: Specifications subject to change without notice.