CVS Series
Compact and Medium Format Ceiling Loudspeakers
CVS range has been designed to meet increased market demand for the best possible performance / value balance, delivering Tannoy’s renowned point-source sonic performance at an extremely competitive value point. All CVS devices utilise the same proven Tannoy co-axial transducer technology found in the successful DVS surface-mount and OCV pendant products, engineered specifically to deliver a level of sonic performance unmatched by comparably priced products on the market today. CVS allows systems designers to retain the benefits of Tannoy’s expertise and resolute brand reputation in commercial ceiling loudspeaker products, even when cost considerations are present in a project.
Features
- Coaxial point-source transducer design
- High power & high sensitivity with extended frequency response and very low distortion
- Wide, controlled constant directivity dispertion for optimum coverage.
- UV/weather resistant UL94V-0 ABS front baffle
- Low insertion loss line transformer with tapping switch
- Ferrofluid cooled neodymium HF
- Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
Applications
- Ballrooms and convention Centres
- Bars & Restaurants
- Casinos
- Concourses
- Conference rooms
- Fitness Centres & Leisure Facilities
- Hotels
- Museums & Galleries
- Retail Spaces & Malls
CVS 6
The compact, small footprint CVS 6 is a 150mm (6") full bandwidth blind mount model, specifically designed for all applications requiring the combination of excellent sonic quality for music and speech reinforcement,exceptional reliability and most critically - affordability.
The CVS 6 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping.
Features
- Coaxially mounted 150mm (6") mineral loaded woofer with rubber surround and 19mm (0.75") soft dome diffraction loaded tweeter
- High power & high sensitivity with extended frequency response and very low distortion
- Wide, controlled constant directivity dispertion for optimum coverage
- UV/weather resistant UL94V-0 ABS front baffle
- Easily accessible tapping switch on front baffle
- Low insertion loss 30 W line transformer
- Ferrofluid cooled neodymium HF
- Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
Applications
- Auditoria / Lecture Theatres
- Ballrooms and convention Centres
- Bars & Restaurants
- Casinos
- Concourses
- Conference rooms
- Fitness Centres & Leisure Facilities
- Hotels
- Museums & Galleries
- Retail Spaces & Malls
Specifications
PERFORMANCE
Frequency Response (-3dB) (1) 79Hz - 21kHz
Frequency Range (-10dB) (1) 60Hz - 24kHz
System Sensitivity (1W @1m) (2) 91dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 93 degrees conical
Directivity Factor (Q) 7.7 averaged 1kHz to 6kHz
Directivity Index (DI) 8 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 109dB
peak: 115dB
Power Handling (3) Average: 60W
Programme: 120W
Peak: 240W
Recommended Amplifier Power 120W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 30W / 15W / 7.5W /
3 .75W / OFF & low impedance operation
100V: 30W / 15W / 7.5W / OFF & low impedance operation
Crossover 2.5kHz
TRANSDUCERS
Low Frequency 150mm (6.00") mineral loaded cone
High Frequency 19mm (0.75") coaxially mounted
PHYSICAL
Enclosure Back Can: Zinc plated steel
Baffle: UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of
enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings UL-1480, UL-2043, CE
Hole Cutout Diameter 250mm (9.84")
Dimensions Bezel diameter: 279.50mm (11.01”)
Front of ceiling to rear of back can: 246.5mm (9.70”)
Front of ceiling to top of safety loop: 258.5mm (10.18")
Net Weight (ea) 4.75kg
Included Accessories C Ring
Tile bridge
Paint mask
Cutout template
Grille
Optional Accessories Plaster (mud) ring
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
(2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test
