NYS-SPP-L

1/4" Patch Panel with 2 rows of sockets, 24 front pairs and 24 rear pairs, 19" rack-mount and fully PCB-wired (24 vertical PC boards) without nut fastening, identification strips for front and rear panel included

Design Criteria The NYS-SPP-L is a economical and robust designed 1/4" modular Patch Panel for 19" rack mount (19" x 1U) with metal housing. Each of it's 48 PCB wired channels (24 front pairs and corresponding 24 rear pairs) is adapted for balanced signals. The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification. Configuration Standard configuration, when delivered, is Half Normalled bottom row. The configuration can easily be changed by just flipping the individual PCB. Inserting a plug into the grey jack will always isolate the top against the bottom row. Alternative solution for send/return applications by use of NYS-SPCR module (see accessories below). The following configurations are available: NYS-SPP-L There are no technical infos for this product. Product Connector Type Patch Panel Electrical Signal Type AES/EBU Signals (digital) Contact resistance < 10 mΩ Dielectric strength 1 kVdc Frequencyrange DC to > 50 MHz Insulation resistance > 1 GΩ @ 500 V dc Channel separation > 100 dB @ 10 kHz, 600 terminated > 40 dB @ 6 MHz, 110 terminated Handles Phantom Power Yes Mechanical Insertion force < 20 N Withdrawal force > 10 N Lifetime > 10000 mating cycles Locking device Retention spring Material Contacts Bronze, tin plated (Jacks) Contacts Bronze, tin plated (Switch contacts) Shell Steel Shell ABS (Jacks) Environmental Temperature range -30 °C to +80 °C Optical Mobile Cables Dimensions 482 x 44 mm (19" x 1U) Depth 61 mm (2.4") Mating plug A-Gauge 1/4" plug acc. EIA RS-453